Solenoid Valves

Normally closed or normally open.Direct acting. Operated by double acting pneumatic or hydraulic cylinder (air, water, light oils).Body: bronze, carbon steel, stainless steel, etc.BSP or NPT threaded or flanged connections.Buna “N”, PTFE, stainless steel seats.Minimum auxiliary pressure: 1.5 bar.5-Way, 2 or 3 position pilot valve.DIN 43650 connection encapsulated coil. IP65 and NEMA 4 protection.Standard constructions to be used with water, air, light oils, other neutral liquids or steam up to 200ºC.

THB 0 ฿ 0

3 Ways, 2 positions, normally closed, normally open or universal.Direct acting. No minimum differential pressure to operate. Body: brass, iron, stainless steel, etc.BSP or NPT 1/4" Connection.Buna N seats for neutral fluids up to 80ºC.Seats: neo

THB 0 ฿ 0

Forged Brass body. BrassPiston.Teflonseats. CapsulatedcoilswithDIN43650.IP65protection. Optional:Manualoperator.Optional: Normally open.Optional:Extender copper tubes.Minimum pressure differential: 0.20BAR(3 PSI).Maximum pressure differential: 21BAR(300 PSI).for direct current: 13 BAR (189 PSI).Maximum working pressure: 28BAR(406 PSI).Temperature range: -40° C to 110° C (-40° F to 230°F).

THB 0 ฿ 0

Normally closed and normally open.Lever activated direct acting. No minimum differential pressure to operate.Body: bronze, stainless steel, etc.Stainless steel needle type seats.Class H coils coated with glass fibre and insulating impregnation.Output cables for splicing.Interior use housing with an outlet for electrical connector.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper (brass body) silver (s.s. body).

THB 0 ฿ 0

Normally closed.Pilot operated.Bronze, stainless steel body.BSP or NPT threaded connection.Brass, stainless steel piston, among others.Coil: Encapsulated up to 150º C (302º F) or coated with glass fibre and insulating impregnation up to 180º C (356º F).Interconnection cables. Internal general use housing.3/4 ” NF electric connection.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.

THB 0 ฿ 0

3 ways, 2 positions, normally closed, normally open.Pilot operated.Seat shutoff. No need for lubrication to operate.Body: brass, stainless steel, etc.BSP or NPT threaded connections.Buna N diaphragm and seats for neutral fluids up to 80ºC.FKM diaphragm and seats for other uses.Shape A DIN 43650 connection encapsulated coils.IP65 and NEMA 4 protection. Pilot orifice with internal discharge. It may be used with fluids which cannot be discharged into the atmosphere.Greater flow capacity and lower response time than any other spool valve of the same size.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper (brass body) silver (s.s. body).

THB 0 ฿ 0

CastBody.Steel forged flanges for welding.Teflonseatsanddiaphragms. CapsulatedcoilswithDIN43650connections. Minimumpressuredifferential:0.07BAR(1PSI) except:1343AT1:0BAR. Maximum pressure differential: 21 BAR (300 PSI).Maximum working pressure : 28BAR(406 PSI). Temperature range: -40°C to 110°C (-40°F to 230°F). ManualOperatorexceptin1343AT1,optionalin1343AT3 and 1343AT34.Optional:strainer1347incorporated.

THB 0 ฿ 0

Normally closed and normally open.Direct acting. No minimum differential pressure to operate.Brass, iron, stainless steel body.1/4” BSP or NPT threaded connections.DIN 43650 connection encapsulated coils, shape A.IP65 and NEMA4 protection.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430F s.s.Shading coil: copper (brass body) silver (s.s. body).Approximate weight: 0.5 kg. (1.1Lb)

THB 0 ฿ 0

Normally closed and normally open.Direct acting. No minimum differential pressure to operate.Brass, iron, stainless steel body.1/4” BSP or NPT threaded connections.DIN 43650 connection encapsulated coils, shape A.IP65 and NEMA4 protection.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430F s.s.Shading coil: copper (brass body) silver (s.s. body).Approximate weight: 0.5 kg. (1.1Lb)

THB 0 ฿ 0

5 ways, 2 positions, monostable or bistable.Aluminium, brass, stainless steel body.BSP or NPT threaded connections.Buna “N” seals for neutral fluids up to 80º C.FKM seals for other uses.PTFE sleeve for instrument air and dry gases.Shape A DIN

THB 0 ฿ 0

Cast body with flanged connections.Counter flanges for welding in forged steel.Stainless steel piston.Teflon seat on the piston.Humidity and weather - proof outlet.Class H coil in polyester.Maximum pressure differential: 17 BAR (245 psi). Minimum: 0 bar.Maximumworkingpressure: 28BAR(406 psi).Temperature range: -40°C to 110°C (-40°F to 230°F).Manual operator in all versions and sizes.

THB 0 ฿ 0

Normally closed and normally open. Direct acting or pilot operated versions. Injected aluminium body. Stainless steel or aluminium die-cast bonnet. BSP or NPT threaded connections. Buna “N” seats and diaphragm. Encapsulated coil. DIN 43650 Connection. IP65 and NEMA 4 Protection.Quick or slow opening adjustable up to 10 sec. Closure in less than 1 second. Optional microcontact for closed valve verification. Core tube: 304 s.s. Core spring: 302 s.s. Core:430 F s.s. Shading coil: copper.

THB 0 ฿ 0

Forged brass, stainless steel body.BSP or NPT threaded connections.Encapsulated plug-in coils. Shape A DIN 43650Connection. IP65 and NEMA4 Protection.Normally closed and normally open.Plastic or metal core diaphragm.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper (brass body) silver (s.s. body).

THB 0 ฿ 0

3 ways, 2 positions, normally open or normally closed.Aluminium, brass, stainless steel body.BSP or NPT threaded connections.Buna “N” seals for neutral fluids up to 80ºC.FKM seals for other uses.PTFE sleeve for instrument air and dry gases.Sha

THB 0 ฿ 0

Cast body.Flanges for welding forged in cast steel.The filtering basket has a stainless steel mesh.The capacity of retention is for particles greater than 100.Modular coupling with Jefferson solenoid valves:1343 Series (all sizes)1344 Series (connections of 3/4" and 1")

THB 0 ฿ 0

Normally closed. Direct acting. No minimum differential pressure to operate.“Free handle” system, i.e., it closes automatically when current is cut off and opens manually when the electric signal is on.Injected or cast aluminium body. Buna “N” seat. DIN 43650 Connection encapsulated coils.IP65 and NEMA 4 Protection. Closed or open valve viewer.360º Rotating housing. Response time < 50 milliseconds.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper.

THB 0 ฿ 0

Normally closed or normally open.Pilot operated.Body: Forged brass or bronze, stainless steel, etc.Shape A DIN 43650 Connection encapsulated coils.IP65 and NEMA4 Protection.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper (brass body) silver (s.s. body).

THB 0 ฿ 0

3 Ways, 2 positions, normally closed, normally open or universal.Direct acting. No minimum differential pressure to operate.Body: brass, iron, stainless steel, etc.BSP or NPT 1/4" Connection.Buna N seats for neutral fluids up to 80ºC.Seats: neop

THB 0 ฿ 0

Forged Brass body.Teflon seats and diaphragm.Capsulatedcoils DIN43650connection IP65protection. Minimumpressuredifferential:0.07BAR(1PSI) except size 1/4" :0 BAR. Maximum pressure differential: 21 BAR (300 PSI) for direct current: 10 BAR. Maximumworking pressure: 28BAR(406 PSI). Temperature range: -40°C to 110°C (-40°F to 230°F). Flare SAE connection or brazing terminals. The copper tube extensions do not require the valve to be disassembled at the time of brazing.

THB 0 ฿ 0

Normally closed and normally open.Lever activated direct acting. No minimum differential pressure to operate.Body: bronze, stainless steel, etc.Stainless steel needle type seats.Class H coils coated with glass fibre and insulating impregnation.Output cables for splicing.Interior use housing with an outlet for electrical connector.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper (brass body) silver (s.s. body).

THB 0 ฿ 0

Normally closed and normally open.Pilot operated.Brass, stainless steel body.BSP or NPT threaded connection.Encapsulated coils. Shape A DIN 43650 Connection.IP65 and NEMA4 Protection.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper (brass body) silver (s.s. body).

THB 0 ฿ 0

5 ways, 2 positions, monostable.Pilot operated.Forged brass body.Buna “N” seals.NAMUR mount.Shape A DIN 43650 connection encapsulated coils.IP65 and NEMA 4 protection.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil:

THB 0 ฿ 0

Falta Traducción

THB 0 ฿ 0

Normally closed. Direct acting. No minimum differential pressure to operate. Body: bronze, stainless steel, etc.BSP or NPT threaded connections.Stainless steel type closure (s).PTFE seat closure (t).Class H coil coated with glass fibre and isolating impregnation. Output cables for splicing (s version).Internal use housing with an outlet for electric connector (s version).Encapsulated coil. Shape A DIN 43650 connection (t version).Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper (brass body) silver (s.s body).

THB 0 ฿ 0

Normally closed and normally open.Direct acting. No minimum differential pressure to operate.Forged brass, nickel-plated forged brass body.BSP or NPT threaded connections.Stainless steel blade type closure PTFE seats.The straight passage prevents pressure drops and turbulence caused by the fluid’s changing direction as it is the case with conventional valves.Shape A DIN 43650 connection encapsulated coils.IP65 and NEMA 4 Protection.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper.

THB 0 ฿ 0

3 ways, 2 positions.Normally closed.Direct acting or pilot operated.Brass body.Buna N seals.NAMUR Mount.Shape A DIN 43650 connection encapsulated coils.IP65 and NEMA 4 protection.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.

THB 0 ฿ 0

Sub-assembly of rod and stainless steel 304 float, with a floating coefficient of 2,5 with respect to the density of ammonia (the least dense refrigerant) to ensure its correct operation even when there is bubbling or foam. Differential of 50mm. to absorb the effects of waves caused by the sudden ingress of liquid, that results in the abnormal opening and closing of the supply upstream valve. If it is desidered to reduce the differential, unscrew the housing and lower the two upper nuts of the rod. Weather-proof hermetic mechanism to IP65. Upon request: weather and explosion-proof. IEC79 - IP65. One or two mechanisms with SPDT mercury contacts or SPDT dry contacts (microswitch). Electrical connection: 3/4" BPS or NPT 360° rotatable.

THB 0 ฿ 0

Normally closed and normally open.Lever activated direct acting. No minimum differential pressure to operate.Body: bronze, stainless steel, etc.Stainless steel needle type seats.Class H coils coated with glass fibre and insulating impregnation.Output cables for splicing.Interior use housing with an outlet for electrical connector.Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper (brass body) silver (s.s. body).

THB 0 ฿ 0

Normally closed.Direct acting. No minimum differential pressure to operate.Forged brass compact body.BSP or NPT threaded connections.Encapsulated minicoils.Shape B DIN 43650 connection.IP65 and NEMA4 Protection.Response time with air at 6 bar (10 milliseconds) Approximate weight: 170 g. (0.38 Lb)Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s.Shading coil: copper.

THB 0 ฿ 0

4 ways, 3 positions, closed center. It allows to operate double acting cylinders or actuators. Aluminium, brass and stainless steel body. BSP or NPT 1/4", 3/8", 1/2" threaded connections. Seat shutoff, 4 diaphragms which plug up therespective ways. High capacity and operation speed. No need for lubrication to operate, ideal for instrument air. Pilot orifices with internal discharge, it may operate dangerous fluids or those which do not allow spills, such as gas, fuel, water, light oils and other similar fluids. Shape A DIN 43650 connection encapsulated coils. IP65 and NEMA 4 protection. Core tube: 304 s.s. Core spring: 302 s.s. Core: 430 F s.s. Shading coil: copper (brass or aluminium body) silver (s.s. body).

THB 0 ฿ 0
Powered by MakeWebEasy.com